Igwe anaghị agba nchara SAW ịgbado ọkụ waya ER316L na flux Welding makings
Teknụzụ ịgbado ọkụ
Ekwela ka ajụjụ ndị ahụ
Gaa n'ihu na-akpagbu gị
Arc enweghị ntụkwasị obi
Ịkpụzi na-adịghị mma
Ọfụfụ dị ukwuu
Kwesịrị ekwesị maka ụlọ ọrụ petrochemical,
ụgbọ mmiri nrụgide, tank nchekwa dị ala
Fatịlaịza, urea, igwe nri na ụlọ ọrụ ndị ọzọ.
Ripple dị mma
Carbon dị ala 18%Cr-12%Ni-2%Mo igwe anaghị agba nchara (SUS316, wdg)
Magburu onwe weldability mgbawa uche na corrosion iguzogide.
Mfe slagging
Usoro ngwaahịa
Ngwakọta kemịkal:
ALOY(wt%) | C | Si | Mn | P | S | Ni | Cr | Mo |
GB/T iwu | 0.015 | 0.76 | 1.65 | 0.024 | 0,002 | 12.6 | 18.4 | 2.3 |
ALA nke igwe:
ALA | Ike ndọtị (Mpa) | Mgbatị /% | IMAPACT URU J/℃ | Intergranular corrosion | ||||
GB/T iwu | 580 | 37 | ≥31/-196 | Usoro GB/T4334E gafere |
NDỊ AKWỤKWỌ NDỊ AKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWASỊAKWỤKWỌRỤRỤ
Nkọwapụta DIAMETERS(mm) | 2.4 | 3.2 | 4.0 | ||||
Volt | 28-32 | 28-32 | 28-32 | ||||
Amp | 270-360 | 400-550 | 500-650 | ||||
Ọsọ (mm/min) | 250-320 | 300-420 | 400-480 | ||||
Mgbatị akọrọ (mm) | 20-24 | 22-26 | 30-34 |
Nkwado ụlọ ọrụ
Ngwaahịa kwesịrị ekwesị maka a
ọtụtụ ngwa ngwa
Teknụzụ ịgbado ọkụ
-
Ọrụ YAMAL LNG
-
Ike nuklia Shandong CV20
-
Ihe ịgbado ọkụ maka ụgbọ okporo ígwè
Ngwakọta kemịkal:
ALOY(wt%) | C | Si | Mn | P | S | Ni | Cr | Mo |
GB/T iwu | 0.015 | 0.76 | 1.65 | 0.024 | 0,002 | 12.6 | 18.4 | 2.3 |
ALA nke igwe:
ALA | Ike ndọtị (Mpa) | Mgbatị /% | IMAPACT URU J/℃ | Intergranular corrosion | ||||
GB/T iwu | 580 | 37 | ≥31/-196 | Usoro GB/T4334E gafere |
NDỊ AKWỤKWỌ NDỊ AKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWASỊAKWỤKWỌRỤRỤ
Nkọwapụta DIAMETERS(mm) | 2.4 | 3.2 | 4.0 | ||||
Volt | 28-32 | 28-32 | 28-32 | ||||
Amp | 270-360 | 400-550 | 500-650 | ||||
Ọsọ (mm/min) | 250-320 | 300-420 | 400-480 | ||||
Mgbatị akọrọ (mm) | 20-24 | 22-26 | 30-34 |