Igwe anaghị agba nchara Flux Cored Waya E308LT1-1/4 ihe ịgbado ọkụ silencer weld
Teknụzụ ịgbado ọkụ
Ekwela ka ajụjụ ndị ahụ
Gaa n'ihu na-akpagbu gị
Arc enweghị ntụkwasị obi
Ịkpụzi na-adịghị mma
Ọfụfụ dị ukwuu
Kwesịrị ekwesị maka petrochemical, arịa nrụgide, igwe nri,
igwe ahụike, igwe textile na ụlọ ọrụ ndị ọzọ metụtara ya,
ịgbado ọkụ 18% Cr-8% Ni igwe anaghị agba nchara (SUS304, 304L, wdg)
Igwe weld nwere oke ferrite kwesịrị ekwesị, mgbape mgbawa, ịgbado ọkụ niile, ụzọ ịgbado ọkụ na-adị ire ụtọ.
Ripple dị mma
-196C obere okpomọkụ siri ike bụ magburu onwe ya, adabara obere okpomọkụ nchekwa tankị na ndị ọzọ ala okpomọkụ akụrụngwa ịgbado ọkụ;
Akụ ahụ dị nro ma kwụsie ike, ọ na-adịchaghị mma, na-akpụ akpụ mara mma, slag dị mma
mwepụ, nri waya kwụsiri ike, nwere ọmarịcha usoro ịgbado ọkụ.
Mfe slagging
Usoro ngwaahịa
Ngwakọta kemịkal:
ALOY(wt%) | C | Mn | Si | P | S | Ni | Cr | Mo | Ndị ọzọ |
GB/T iwu | 0.02 | 0.5 | 1.50 | 0.02 | 0,003 | 10.6 | 18.4 | 0.01 | Nke: 0.01 |
ALA nke igwe:
ALA | IKE (MPa) | IKE EXTENSION (MPa) | Mgbatị /% | IMAPACT URU J/℃ | Ọgwụgwọ okpomọkụ °C*h | |||||
GB/T iwu | - | 550 | 44 | 34/-196 | - |
NDỊ AKWỤKWỌ NDỊ AKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWASỊAKWỤKWỌRỤRỤ
Nkọwapụta DIAMETERS(mm) | 1.2 | 1.6 | |||
Voltaji (Volt) | 20-36 | 24-38 | |||
Ọkụ eletrik (Amp) | 120-260 | 200-300 | |||
Ọsọ (mm/min) | 15-25 | 18-25 | |||
Ogologo ogologo ogologo (mm) | 15-25 | 15-25 |
Nkwado ụlọ ọrụ
Ngwaahịa kwesịrị ekwesị maka a
ọtụtụ ngwa ngwa
Teknụzụ ịgbado ọkụ
Reactor internals
-
981 ọkara-submersible mkpọ ala
-
8.2-ton nnukwu ebu
Ngwakọta kemịkal:
ALOY(wt%) | C | Mn | Si | P | S | Ni | Cr | Mo | Ndị ọzọ |
GB/T iwu | 0.02 | 0.5 | 1.50 | 0.02 | 0,003 | 10.6 | 18.4 | 0.01 | Nke: 0.01 |
ALA nke igwe:
ALA | IKE (MPa) | IKE EXTENSION (MPa) | Mgbatị /% | IMAPACT URU J/℃ | Ọgwụgwọ okpomọkụ °C*h | |||||
GB/T iwu | - | 550 | 44 | 34/-196 | - |
NDỊ AKWỤKWỌ NDỊ AKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWASỊAKWỤKWỌRỤRỤ
Nkọwapụta DIAMETERS(mm) | 1.2 | 1.6 | |||
Voltaji (Volt) | 20-36 | 24-38 | |||
Ọkụ eletrik (Amp) | 120-260 | 200-300 | |||
Ọsọ (mm/min) | 15-25 | 18-25 | |||
Ogologo ogologo ogologo (mm) | 15-25 | 15-25 |