Carbon steels dị elu SAW ịgbado ọkụ waya F7A/P4-ECG na ịgbado ọkụ flux weld imepụta njikọ.
Ejiri ya maka -60C mmetụta achọrọ gburugburu ebe obibi, nke a na-ejikarị eme ihe maka ụgbọ mmiri, pipeline, ịgbado ọkụ ụgbọ mmiri.
Kedu ihe bụ njirimara?
●The metal ntụ ntụ ụdị submerged arc ịgbado ọkụ waya nke 480MPa ọkwa elu ike ígwè na-welded na GXL-121 flux. The arc combustion kwụsiri ike, slag mwepụ dị mfe, na ịgbado ọkụ pass akpụ mara mma.
●Ngwongwo weld nwere ezigbo ihe eji arụ ọrụ, ọdịnaya dị ala nke P na S, yana arụmọrụ mmetụta dị ala dị ala.
Usoro ngwaahịa
Ngwakọta kemịkal:
ALOY(wt%) | C | Si | Mn | P | S | Ni | Cr | Mo |
GB/T iwu | 0.088 | 0.225 | 1.46 | 0.012 | 0,007 | 0.015 | 0.025 | 0.01 |
ALA nke igwe:
ALA | IKE (MPa) | IKE EXTENSION (MPa) | EGO % | IMAPACT URU J/℃ | Ọgwụgwọ okpomọkụ °C*h | ||||
GB/T iwu | 458 | 564 | 27.5 | 142/-40 | 620*4 |
NDỊ AKWỤKWỌ NDỊ AKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWASỊAKWỤKWỌRỤRỤ
Nkọwapụta DIAMETERS(mm) | 3.2 | 4.0 | |||
Voltaji (Volt) | 28-32 | 28-32 | |||
Ọkụ eletrik (Amp) | 400-550 | 500-650 | |||
Ọsọ (mm/min) | 300-420 | 400-480 | |||
Ogologo ogologo ogologo (mm) | 22-26 | 30-34 |
Ụdị njem njem
●Ụgbọ njem ụgbọ ala
●Mbupu
Ụlọ nkwakọba ihe anyị
Anyị na-esonye na mmemme
●Ihe ịgbado ọkụ maka karama ụgbọ ala LNG
●Tangshan LNG mbupụ pipeline oru ngo
Ngwaahịa anyị na ụwa
Ngwakọta kemịkal:
ALOY(wt%) | C | Si | Mn | P | S | Ni | Cr | Mo |
GB/T iwu | 0.088 | 0.225 | 1.46 | 0.012 | 0,007 | 0.015 | 0.025 | 0.01 |
ALA nke igwe:
ALA | IKE (MPa) | IKE EXTENSION (MPa) | EGO % | IMAPACT URU J/℃ | Ọgwụgwọ okpomọkụ °C*h | ||||
GB/T iwu | 458 | 564 | 27.5 | 142/-40 | 620*4 |
NDỊ AKWỤKWỌ NDỊ AKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWASỊAKWỤKWỌRỤRỤ
Nkọwapụta DIAMETERS(mm) | 3.2 | 4.0 | |||
Voltaji (Volt) | 28-32 | 28-32 | |||
Ọkụ eletrik (Amp) | 400-550 | 500-650 | |||
Ọsọ (mm/min) | 300-420 | 400-480 | |||
Ogologo ogologo ogologo (mm) | 22-26 | 30-34 |
Dee ozi gị ebe a ziga anyị ya